Accessibility and standards

Check whether a PDF can be read with a screen reader, fix what is missing, and check it against the PDF/UA and PDF/A standards.

An accessible PDF can be read by everyone, including people who use a screen reader or enlarge the text. It has tags that give the reading order and say what each part is (a heading, a paragraph, a list, a table, a figure), a description of each picture, a title and a language.

The tools are on the Accessibility & Standards tab.

The Accessibility & Standards tab
The Accessibility & Standards tab
  1. Autotag Document builds the tags from the content of the pages.
  2. Set Alternate Text describes each picture.
  3. Accessibility Check checks the document and lists what is missing.
  4. Verify Compliance checks the document against a standard: PDF/UA, PDF/A or PDF/X.

Checking, verifying and saving the reports are free. What changes the document needs Pro: Autotag Document, Set Alternate Text, the Fix buttons, and editing the tags and the reading order.

Check a document

  1. On the Accessibility & Standards tab, click Accessibility Check.
  2. Choose what to check. Leave everything ticked for a full check, including PDF/UA requirements (Matterhorn Protocol). Choose All pages, or some pages.
  3. Click Start Checking.
The checker's options
The checker's options

The results open in the Accessibility Checker panel on the left. The line at the top counts the rules that passed, failed, need a manual check, or were skipped. The rules are grouped: Document, Page Content, Forms, Alternate Text, Tables, Lists and Headings, followed by the PDF/UA requirements.

The results of the check
The results of the check
  • ✓ in green: the rule passed.
  • ✗ in red: the rule failed. Expand it to see where; click a place to show it on the page.
  • ? in amber: the editor cannot decide, and you should check it yourself. For example, whether the reading order makes sense, or whether the text stands out from its background.

Click a rule to read below the list what it means and how to fix it.

To keep the results, click Show Report (or Accessibility Report on the ribbon) and save them as a web page you can open in any browser. Check Again runs the check again after you have made changes.

Each rule names the WCAG success criteria it checks (they are also under its explanation in the panel), and the report adds a table of those criteria, with their level (A or AA) and what the check found for each. Section 508 asks for WCAG 2.0 Level A and AA, and sets aside 2.4.1 and 2.4.5 for documents that are not web pages; ADA Title II asks for WCAG 2.1 Level A and AA; the European Accessibility Act asks for EN 301 549, which uses WCAG 2.1 or, in its 2026 version, WCAG 2.2 Level A and AA. The check tests what can be tested in the file; some criteria, such as meaningful alternate text, a logical reading order and colour contrast, also need a person to review the document.

Fix what failed

Select a failed rule and click Fix, or right-click it and choose Fix. What the fix does depends on the rule:

  • Tagged PDF: the document is tagged with Autotag Document.
  • Primary language: you type the language of the document, as a language tag such as en-US.
  • Title: you type the document's title, and it is shown in the title bar.
  • Field descriptions: the fields without a description, the tooltip a screen reader reads, one after another: the view goes to each, and its box already holds a suggestion (a signature field Signature, another field the label beside it on the page, or else its name) that you keep or change. Use the arrows to go to the previous or next field, and Save & Close to write them all. Click a field under the rule first to start at it.
  • Summary: the tables without a summary, one after another: Table 1 of 3 (page 2), the table as the page shows it, and a box for its summary (what the table shows and how it is laid out). Use the arrows to go between the tables, and Save & Close to write the summaries. Click a table under the rule first to start at it.
  • Character encoding: text in a font that has no letters a screen reader can read, such as a barcode font, becomes shapes. It looks and prints as before, and a barcode still scans, but it can no longer be selected, searched or edited, so the editor asks first. Then tag it in Reading Order as a figure with a description, or as an artifact.
  • Figures alternate text: Set Alternate Text opens.
  • Tagged content: the editor asks whether to tag the content where it reads (text as paragraphs, pictures as figures, the rest as artifacts) or to open the Reading Order panel and tag it yourself.
  • Image-only PDF: the text of the pages is recognized (OCR).
  • Accessibility permission flag: the security settings open, to allow assistive technology to read the text.
  • Nested alternate text, Hides annotation, Rows, TH and TD, List items, Lbl and LBody and Appropriate nesting: the tags are put right at once - alternate text that is never read is removed, cells, rows and list items go where they belong, and a heading that skips a level takes the next one.
  • Other rules are fixed at once, where the editor can.

The PDF/UA requirements below the rules can be fixed the same way: select one and click Fix to run the fix of the rule that repairs it, or choose Explain to read what it means and what to do.

After a fix, the check runs again. The groups you opened stay open and the row you picked stays picked: when it was a finding that is now fixed, the next one under the same rule is picked, ready for the next fix. A group with a failed rule is shown in red. A rule that you know is fine can be left out of the results: right-click it and choose Skip Rule.

To see a failure in the file, right-click it and choose Show in PDF Structure: PDF Structure opens at its tag's structure element, or at its page.

Fixes change the document like any edit: Undo takes them back, and you save the document to keep them.

Tag a document

A PDF the editor makes from a Word document is tagged already, unless that setting was turned off (see Create a PDF). For a PDF without tags:

  1. Click Autotag Document. The editor finds the headings, paragraphs, lists, tables, figures, links and form fields, and marks what is only decoration as artifacts, which screen readers skip.
  2. The status bar says what was tagged.

If the document already has tags, the editor asks whether to replace them.

To look at the tags and correct them, click Tags. To check and correct the order in which the page is read, and to tag content by hand, click Reading Order. Both are explained in Tags and reading order.

Describe the pictures

People who cannot see a picture hear its alternate text instead.

  1. Click Set Alternate Text. Each figure is shown in turn, and highlighted on its page.
  2. Type what the picture shows. If it is only decoration, tick Decorative figure: screen readers skip it.
  3. Go to the other figures with Previous figure and Next figure.
  4. Click Save & Close.
Describing a figure
Describing a figure

If the document has no tags, the editor offers to tag it first: a picture needs a figure tag to carry its description.

Check against PDF/UA, PDF/A and PDF/X

Some organizations require a PDF to meet a standard: PDF/UA for accessibility, PDF/A for archiving, PDF/X for printing. Click Verify Compliance, choose the Standard in the Standards panel, and click Verify: the panel says whether the document complies, and lists what fails.

A document checked against PDF/UA-1
A document checked against PDF/UA-1

How to read the result, fix what fails, save a report, and save a copy as PDF/A is explained in PDF standards.